Florida Sportsman was there first to cover, test and photograph the brand new 24-foot Thread Fin 237 bay boat. Bobby Smits, spokesperson and owner of Thread Fin boats, brought the boat over to our home waters of the St. Lucie River for a firsthand look. Talking to Bobby, he envisioned a full-size bay boat at home both inshore and offshore. At 23 feet, 7 inches—plus a foot-long Porta bracket engine lift—this boat is likely to spend as much time offshore as inshore. Some bay boats ride and feel more like flats skiffs; the Thread Fin 237 definitely feels more like an offshore center console.

The base model includes a 2-tone hull; oversize captain’s chair livewell; stainless steel hardware such as cleats, bow lights, fuel cap and steering wheel; 1,500 g.p.h. bilge pump; 85 gallon aluminum fuel tank; and console switch panel with breakers. Among many options are secondary livewell and bilge pumps, exterior LED lighting, tower, cooler, dive platform and ladder, and additional flush-mount rod holders.

Build process: Thread Fin Boats are custom built using Cook Armor flex gelcoat, 100-percent Vinylester hand-laid skin coat, and closed cell high-density core with bi- and tri-axial hand-laid fiberglass. Heat-shrink connectors are used on all wiring. All hardware is stainless steel, including the through-hull fittings.

On the water test: Rigged with a 300-hp Mercury Verado and 19-inch prop, the boat hit 55 mph with four persons on board. In the channel, the boat planed quickly and quietly, with help from a proprietary step hull. Smits says the boat drafts 10 inches.

Thread Fin boats is located in Naples at 1310 19th Street SW
Phone number: (239) 289-2580
Threadfinboats.com

Specifications

Length: 23' 7"

Beam: 8' 3"

Dry weight: 2,100 lbs. without power

Draft: 10 inches

Max horsepower: 300 hp

Fuel capacity: Single, 85-gallon tank

Transom height: 30 inches

Transom deadrise: 12.5 degrees

Cockpit area: 202 square feet

Total storage: 65 cubic feet

A shot from above. The Thread Fin 237 is two-toned—pictured above in black and white—but available in other colors such as yellow. The 24-foot bay boat has all flush-mount gunnel cleats and rod holders. A T-top is available for anglers expecting to fish offshore regularly.

At the bow, running lights, cleats and rod holders surround anchor locker. Embroidered padding wraps around the inside of the boat. Owner Bobby Smits plans to experiment with an anchor hatch that opens on an angle to allow for a trolling motor.

Oversize bow hatch has divided compartments. Store items like life jackets and even rods in the forward section.

Center console bow seat opens up to reveal wiring to electronics.

Electronics wiring and batteries are easy to access.